Filter
Top Products
Chapter 6 Broadband
AMG1312-T Series User’s Guide
81
Note: The actual data rate you obtain varies depending the 3G card you use, the signal
strength to the service provider’s base station, and so on.
Figure 25 Network Setting > Broadband > 3G Backup
The following table describes the labels in this screen.
Table 16 Network Setting > Broadband > 3G Backup
LABEL DESCRIPTION
General
3G Backup Select Enable to have the AMG1312-T Series use the 3G connection as your WAN or a
backup when the wired WAN connection fails.
Card
description
This field displays the manufacturer and model name of your 3G card if you inserted one in
the AMG1312-T Series. Otherwise, it displays N/A.
Username Type the user name (of up to 64 ASCII printable characters) given to you by your service
provider.
Password Type the password (of up to 64 ASCII printable characters) associated with the user name
above.
PIN A PIN (Personal Identification Number) code is a key to a 3G card. Without the PIN code,
you cannot use the 3G card.
If your ISP enabled PIN code authentication, enter the 4-digit PIN code (0000 for example)
provided by your ISP. If you enter the PIN code incorrectly, the 3G card may be blocked by
your ISP and you cannot use the account to access the Internet.
If your ISP disabled PIN code authentication, leave this field blank.