Filter
Top Products
Chapter 3 Internet / Wireless Setup Wizard
AMG1312-T Series User’s Guide
29
Note: Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) define a virtual
circuit.
Figure 10 Internet Connection with ENET ENCAP
The following table describes the fields in this screen.
Table 4 Internet Connection with ENET ENCAP
LABEL DESCRIPTION
Encapsulation Select the encapsulation type your ISP uses from the Encapsulation drop-down list
box: IPoA, ENET ENCAP, PPPoA, or PPPoE.
Multiplex Select the multiplexing method used by your ISP from the Multiplex drop-down list box
either VC-based or LLC-based.
VPI Enter the Virtual Path Identifier (VPI) assigned to you. This field may already be
configured.
VCI Enter the Virtual Channel Identifier (VCI) assigned to you. This field may already be
configured.
Select Yes to enter specific IP information from your Internet service provider. Enter your Internet access
information exactly as your service provider gave it to you.
IP Address Enter the IP address of the AMG1312-T Series.
Subnet Mask Enter the subnet mask in dotted decimal notation.
Refer to the appendix to calculate a subnet mask if you are implementing subnetting.
Default Gateway You must specify a gateway IP address (supplied by your ISP) when you use ENET
ENCAP in the Encapsulation field in the previous screen.
Primary DNS Server Enter the primary DNS server IP address for the AMG1312-T Series.
Secondary DNS
Server
Enter the secondary DNS server IP address for the AMG1312-T Series.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Exit Click this to close the wizard screen without saving.