Filter
Top Products
Chapter 7 Wireless LAN
AMG1312-T Series User’s Guide
95
Figure 33 More AP: Edit
The following table describes the fields in this screen.
Table 22 More AP: Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless Select Enable Wireless LAN to activate wireless LAN.
Wireless Network Settings
Wireless Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless
LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Guest WLAN Select this check box to enable and configure the guest wireless network.
Security Level
Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on
this wireless network. The wireless clients which want to associate to this network
must have same wireless security settings as the AMG1312-T Series. After you
select to use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without
any data encryption or authentication.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.