Filter
Top Products
Chapter 8 Home Networking
AMG1312-T Series User’s Guide
122
The following table describes the labels in this screen.
8.6 The IPv6 LAN Setup Screen
Use this screen to configure the IPv6 settings for your AMG1312-T Series’s LAN interface. See
Appendix E on page 277 for background information about IPv6.
Figure 53 Network Setting > Home Networking > IPv6 LAN Setup
Table 35 Network Setting > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open the
web configurator's login screen without entering the AMG1312-T Series's IP address (although
you must still enter the password to access the web configurator). Otherwise, select Disable to
deactivate UPnP.
Apply Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.