Filter
Top Products
Chapter 7 Wireless LAN
AMG1312-T Series User’s Guide
97
7.5 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your AMG1312-T Series.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See Section 7.10.8.3 on page 110 for more information about WPS.
Note: The AMG1312-T Series applies the security settings configured in the General
screen (see Section 7.2 on page 88). If you want to use the WPS feature, make
sure you have set the security mode to WPA-PSK, WPA2-PSK or No Security.
Click Network Setting > Wireless > WPS. The following screen displays. Select Enable and click
Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 35 Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > WPS
LABEL DESCRIPTION
General
WPS Select Enable to activate WPS on the AMG1312-T Series. Otherwise, select Disable to
deactivate WPS.