Filter
Top Products
Chapter 5 Connection Status and System Info Screens
AMG1312-T Series User’s Guide
66
IPv6 Global
IP
This is the current global IPv6 address of the AMG1312-T Series.
DHCP This field displays what DHCP services the AMG1312-T Series is providing to the LAN.
Choices are:
Server - The AMG1312-T Series is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
Relay - The AMG1312-T Series acts as a surrogate DHCP server and relays DHCP requests
and responses between the remote server and the clients.
None - The AMG1312-T Series is not providing any DHCP services to the LAN.
IPv6 LAN
DNS1/2
This is the first/second DNS server IPv6 address the AMG1312-T Series passes to the DHCP
clients.
WLAN Information
Status This displays whether wireless LAN is turned on or off.
SSID This is the descriptive name used to identify the AMG1312-T Series in the wireless LAN.
Channel This is the channel number used by the AMG1312-T Series now.
Security
Mode
This displays the type of security the AMG1312-T Series is using in the wireless LAN.
WPS Configured displays when the WPS security settings have been configured and wireless
clients can connect with the device through WPS. Unconfigured displays when the device
has not been configured and wireless clients can’t establish a link with the device through
WPS.
Scheduling This displays whether WLAN scheduling is activated.
WiFi MAC This is the MAC (Media Access Control) of the WiFi interface.
Security
Firewall
This displays whether or not the AMG1312-T Series’s firewall is activated. Click this to go to
the screen where you can change it.
Interface Status
Interface This column displays each interface the AMG1312-T Series has.
Status This field indicates whether or not the AMG1312-T Series is using the interface.
For the DSL interface, this field displays Down (line is down), Up (line is up or connected),
Initializing (line is initializing), Establishing Link (line is establishing a link) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or connected), Idle
(line (ppp) idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're using
PPPoE encapsulation.
For the LAN interface, this field displays Up when the AMG1312-T Series is connected
through an Ethernet cable to a computer or a HUB. It displays Down when the AMG1312-T
Series’s Ethernet port is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or InActive when WLAN
is disabled.
Rate For the LAN interface, this displays the port speed.
For the WAN interface, this displays the DSL link rate downstream and upstream.
For the DSL interface, it displays the downstream and upstream transmission rate.
For the WLAN interface, it displays the maximum transmission rate when WLAN is enabled
or N/A when WLAN is disabled.
System Status
Table 10 System Info Screen (continued)
LABEL DESCRIPTION