Filter
Top Products
ES-2024 Series User’s Guide
Chapter 30 Introducing the Commands 190
Note: You may also edit a configuration file using a text editor.
Make sure you use valid commands. The switch rejects configuration files with
invalid or incomplete commands.
30.10.2 Logging Out
In User or Enable mode, enter the exit or logout command to log out of the CLI. In Config
mode entering
exit takes you out of the Config mode and into Enable mode and entering
logout logs you out of the CLI.
30.11 Command Summary
The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in alphabetical order. See the
related section in the User’s Guide for more background information.
30.11.1 User Mode
The following table describes the commands available for User mode.
Table 70 Command Summary: User Mode
COMMAND DESCRIPTION PRIVILEGE
enable
Accesses Enable (or privileged) mode. See Section
30.11.2 on page 191.
0
exit
Logs out from the CLI. 0
help
Displays help information. 0
history
Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
0
logout
Exits from the CLI. 0
ping <ip|host-name>
Sends Ping request to an Ethernet device. 0
<ip|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
0
help
Displays command help information. 0
show ip
Displays IP related information. 0
system-information
Displays general system information. 0
ssh <1|2> <[user@]dest-ip>
Connects to an SSH server with the specified SSH
version.
0
tracerout
e
<ip|host-name>
Determines the path a packet takes to a device. 0