Filter
Top Products
ES-2024 Series User’s Guide
201 Chapter 30 Introducing the Commands
ssh key
<rsa1|rsa|ds
a>
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
13
known-hosts
<host-ip>
Removes the specified remote
hosts from the list of all known
hosts.
13
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts with
the specified public key (1024-bit
RSA1, RSA or DSA).
13
storm-control
Disables broadcast storm control. 13
timesync
Disables timeserver settings. 13
trunk <T1|T2|T3>
Disables the specified trunk group. 13
<T1|T2|T3>
interface
<port-list>
Removes ports from the specified
trunk group.
13
<T1|T2|T3>
lacp
Disables LACP in the specified
trunk group.
13
vlan <vlan-id>
Deletes the static VLAN entry. 13
vlan1q gvrp
Disables GVRP on the switch. 13
ingress-
check
Disables VLAN tag checking on
incoming traffic.
13
port-
isolation
Disables port isolation. 13
password
Change the password for Enable
mode.
14
port-
access-
authenticat
or
Enables 802.1x authentication on
the switch.
13
<port-list>
Enables 802.1x authentication on
the specified port(s).
13
reauthentica
te
Sets a subscriber to periodically
re-enter his or her username and
password to stay connected to a
specified port.
13
reauth-
period
<reauth-
period>
Specifies how often a client has to
re-enter the username and
password to stay connected to the
specified port(s).
13
port-
security
Enables port security on the
switch.
13
<port-list>
Enables the port security feature
on the specified port(s).
13
Table 72 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE