Filter
Top Products
ES-2024 Series User’s Guide
205 Chapter 30 Introducing the Commands
30.11.4 interface port-channel Commands
The following table lists the interface port-channel commands in Configure mode. Use
these commands to configure the ports.
interface <port-
list> timeout
<lacp-timeout>
Defines the port number and
LACP timeout period.
13
vlan <1-4094>
Enters the VLAN configuration
mode. See Section 30.11.6 on
page 209 for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
vlan1q gvrp
Enables GVRP. 13
ingress-check
Enables VLAN tag checking on
incoming traffic.
13
port-isolation
Enables port-isolation. 13
wrr
Sets the switch to use Weighted
Round Robin queuing (WRR).
13
<wt1><wt2> ...
<wt4>
Sets the WRR weight. A weight
value of one to eight is given to
each variable from
wt1 to wt4.
13
Table 72 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 73 interface port-channel Commands
COMMAND DESCRIPTION PRIVILEGE
interface
port-channel
<port-list>
Enables a port or a list of ports
for configuration.
13
bandwidth-limit egress
Enables bandwidth control on
for outgoing traffic on he port(s).
13
egress <Kbps>
Sets the maximum bandwidth
allowed for outgoing traffic on
the port(s).
13
ingress
Enables bandwidth control on
for incoming traffic on he
port(s).
13
ingress <Kbps>
Sets the maximum bandwidth
allowed for incoming traffic on
the port(s).
13
bmstorm-limit
Enables broadcast storm
control on the port.
13
<Kpbs>
Sets the limit of broadcast storm
packets in kilobit per second
(Kbps).
13
diffserv
Enables DiffServ on the port(s). 13