Filter
Top Products
ES-2024 Series User’s Guide
197 Chapter 30 Introducing the Commands
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
igmp-
snooping
Enables IGMP snooping. 13
8021p-priority
<0-7>
Sets a priority level (0-7) to which
the switch changes the priority in
outgoing IGMP control packets.
13
host-timeout <1 -
16711450>
Sets the host timeout value. 13
leave-timeout <1
- 16711450>
Sets the leave timeout value 13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
interface port-channel
<port-list>
Enables a port or a list of ports for
configuration. See Section 30.11.4
on page 205 for more details.
13
ip name-server <ip>
Sets the IP address of a domain
name server.
13
route <ip> <mask>
<next-hop-
ip>
Creates a static route. 13
<ip> <mask>
<next-hop-
ip> [metric
<metric>]
[name
<name>]
[inactive]
Sets the metric of a static route or
deactivates a static route.
13
lacp
Enables Link Aggregation Control
Protocol (LACP).
13
system-priority <1-65535>
Sets the priority of an active port
using LACP.
13
loginPreced
ence
<LocalOnly |
LocalRADIUS |
RADIUSOnly>
Select which database the switch
should use (first) to authenticate a
user.
14
logins username <name> password
<pwd>
Configures up to four login
accounts.
14
privilege
<0-14>
Sets the access privilege for the
existing login accounts. The higher
the value, the more commands are
allowed.
14
logout
Exits from the CLI. 13
mac-aging-
time
<10-3000>
Sets learned MAC aging time. 13
Table 72 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE