Filter
Top Products
ES-2024 Series User’s Guide
209 Chapter 30 Introducing the Commands
30.11.6 config-vlan Commands
The following table lists the vlan commands in Configure mode.
group <name-
str>
Disables the specified MVR
group setting.
13
inactive
Enables MVR. 13
receiver-port
<port-list>
Disables the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
<port-list>
Disables the source port(s).
An MVR source port can send
and receive multicast traffic in a
multicast VLAN.
13
tagged <port-
list>
Sets the port(s) to untag VLAN
tags.
13
receiver-port
<port-list>
Sets the receiver port(s).
An MVR receiver port can only
receive multicast traffic in a
multicast VLAN.
13
source-port
<port-list>
Sets the source port(s).
An MVR source port can send
and receive multicast traffic in a
multicast VLAN.
13
tagged <port-
list>
Sets the port(s) to tag VLAN
tags.
13
Table 74 mvr Commands (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 75 Command Summary: config-vlan Commands
COMMAND DESCRIPTION PRIVILEGE
vlan <1-
4094>
Creates a new VLAN group. 13
exit
Leaves the VLAN configuration mode. 13
fixed <port-
list>
Specifies the port(s) to be a permanent
member of this VLAN group.
13
forbidden <port-
list>
Specifies the port(s) you want to
prohibit from joining this VLAN group.
13
help
Displays a list of available VLAN
commands.
13
inactive
Disables the specified VLAN. 13
ip address <ip-address>
<mask>
Sets the IP address and subnet mask
of the switch in the specified VLAN.
13