Filter
Top Products
Chapter 4 Wizard Setup
ZyWALL USG 100/200 Series User’s Guide
106
4.8.8 VPN Advanced Wizard - Summary
This summary of VPN tunnel settings is read-only.
Name: Identifies the VPN connection (and the VPN gateway).
Secure Gateway: IP address or domain name of the peer IPSec device.
Pre-Shared Key: VPN tunnel password.
Local Policy: IP address and subnet mask of the computers on the network behind your
ZyWALL that can use the tunnel.
Remote Policy: IP address and subnet mask of the computers on the network behind the peer
IPSec device that can use the tunnel.
Copy and paste the Remote Gateway CLI commands into another ZLD-based ZyWALL’s
command line interface.
Click Save to save the VPN rule.
4.8.9 VPN Advanced Wizard - Finish
Now you can use the VPN tunnel.
Remote
Policy
This is a (static) IP address and Subnet Mask on the network behind the remote
IPSec router.
Remote
Gateway CLI
These commands set the matching VPN connection settings for the remote gateway.
If the remote gateway is a ZLD-based ZyWALL, you can copy and paste this list into
its command line interface in order to configure it for the VPN tunnel.
You can also use a text editor to save these commands as a shell script file with a
“.zysh” filename extension. Then you can use the file manager to run the script in
order to configure the VPN connection.
See the commands reference guide for details on the commands displayed in this
list.
Save Click Save to store the VPN settings on your ZyWALL.
Table 21 VPN Advanced Wizard: Step 5 (continued)
LABEL DESCRIPTION