Filter
Top Products
Chapter 29 IDP
ZyWALL USG 100/200 Series User’s Guide
504
IP Options IP options is a variable-length list of IP options for a datagram that define IP
Security Option, IP Stream Identifier, (security and handling restrictions for the
military), Record Route (have each router record its IP address), Loose Source
Routing (specifies a list of IP addresses that must be traversed by the datagram),
Strict Source Routing (specifies a list of IP addresses that must ONLY be
traversed by the datagram), Timestamp (have each router record its IP address
and time), End of IP List and No IP Options. IP Options can help identify some
intrusions. Select the check box, then select an item from the list box that the
intrusion uses
Same IP Select the check box for the signature to check for packets that have the same
source and destination IP addresses.
Transport Protocol The following fields vary depending on whether you choose TCP, UDP or ICMP.
Transport
Protocol: TCP
Port Select the check box and then enter the source and destination TCP port
numbers that will trigger this signature.
Flow If selected, the signature only applies to certain directions of the traffic flow and
only to clients or servers. Select Flow and then select the identifying options.
Established: The signature only checks for established TCP connections
Stateless: The signature is triggered regardless of the state of the stream
processor (this is useful for packets that are designed to cause devices to crash)
To Client: The signature only checks for server responses from A to B.
To Server: The signature only checks for client requests from B to A.
From Client:.The signature only checks for client requests from B to A.
From Servers: The signature only checks for server responses from A to B.
No Stream: The signature does not check rebuilt stream packets.
Only Stream: The signature only checks rebuilt stream packets.
Flags Select what TCP flag bits the signature should check.
Sequence
Number
Use this field to check for a specific TCP sequence number.
Ack Number Use this field to check for a specific TCP acknowledgement number.
Window Size Use this field to check for a specific TCP window size.
Transport
Protocol: UDP
Port Select the check box and then enter the source and destination UDP port
numbers that will trigger this signature.
Transport
Protocol: ICMP
Type Use this field to check for a specific ICMP type value.
Code Use this field to check for a specific ICMP code value.
ID Use this field to check for a specific ICMP ID value. This is useful for covert
channel programs that use static ICMP fields when they communicate.
Sequence
Number
Use this field to check for a specific ICMP sequence number. This is useful for
covert channel programs that use static ICMP fields when they communicate.
Payload Options The longer a payload option is, the more exact the match, the faster the signature
processing. Therefore, if possible, it is recommended to have at least one payload
option in your signature.
Table 162 Anti-X > IDP > Custom Signatures > Add/Edit (continued)
LABEL DESCRIPTION