Filter
Top Products
Chapter 27 Application Patrol
ZyWALL USG 100/200 Series User’s Guide
454
27.3.1 The Application Patrol Edit Screen
Use this screen to edit the settings for an application. To access this screen, go to the
application patrol Common, Instant Messenger, Peer to Peer, VoIP, or Streaming screen
and click an application’s Edit icon. The screen displayed here is for the MSN instant
messenger service.
Figure 364 Application Edit
The following table describes the labels in this screen.
Modify This column provides icons to activate and deactivate each application and to edit
the settings for each one.
To activate or deactivate patrol for an application, click the Active icon for the
corresponding application. Make sure you click Apply to save and apply the
change.
To edit the settings for an application, click the Edit icon next to the application.
The Configuration Edit screen appears.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 138 AppPatrol > Common (continued)
LABEL DESCRIPTION
Table 139 Application Edit
LABEL DESCRIPTION
Service
Enable
Service
Select this check box to turn on patrol for this application.
Service
Identification
Name This field displays the name of the application.
Classification Specify how the ZyWALL should identify this application. Choices are:
Auto - the ZyWALL identifies this application by matching the IP payload with the
application’s pattern(s).
Service Ports - the ZyWALL identifies this application by looking at the destination
port in the IP header.