Filter
Top Products
ZyWALL USG 100/200 Series User’s Guide
593
CHAPTER 35
User/Group
35.1 Overview
This chapter describes how to set up user accounts, user groups, and user settings for the
ZyWALL. You can also set up rules that control when users have to log in to the ZyWALL
before the ZyWALL routes traffic for them.
35.1.1 What You Can Do Using The User/Group Screens
•The User screen (see Section 35.2 on page 595) provides a summary of all user accounts.
•The Group screen (see Section 35.3 on page 598) provides a summary of all user groups.
In addition, this screen allows you to add, edit, and remove user groups. User groups may
consist of access users and other user groups. You cannot put admin users in user groups
•The Setting screen (see Section 35.4 on page 599) controls default settings, login settings,
lockout settings, and other user settings for the ZyWALL. You can also use this screen to
specify when users must log in to the ZyWALL before it routes traffic for them.
35.1.2 What You Need To Know About User/Groups
User Account
A user account defines the privileges of a user logged into the ZyWALL. User accounts are
used in firewall rules and application patrol, in addition to controlling access to configuration
and services in the ZyWALL.
User Types
These are the types of user accounts the ZyWALL uses.
Table 190 Types of User Accounts
TYPE ABILITIES LOGIN METHOD(S)
Admin Users
Admin Change ZyWALL configuration (web, CLI) WWW, TELNET, SSH, FTP,
Console, Dial-in
Limited-Admin Look at ZyWALL configuration (web, CLI)
Perform basic diagnostics (CLI)
WWW, TELNET, SSH, Console,
Dial-in
Access Users
User Access network services
Browse user-mode commands (CLI)
WWW, TELNET, SSH