Filter
Top Products
5
NETWARE DRIVERS
Obtaining NetWare
Loadable Modules
Although NetWare Loadable Modules (NLMs) are provided on the EtherCD, you
can always obtain the most current NLMs from the Novell Web site.
Go to: http://www
.support.novell.com.
NetWare Server Driver The NWSERVER directory on the EtherCD contains the network driver file
(3C99X.LAN), which must be used for servers running NetWare 3.12, 4.10, 4.11,
or 5.0. NetWare Loadable Modules (NLMs), which are in the same directory, are
additional required files.
To obtain the most current NLMs from Novell
Go to: http://www
.support.novell.com.
For information on how to create installation diskettes
Go to: Making NIC Installation
Diskettes.
NetWare 3.12 To upgrade the driver in a NetWare 3.12 server:
1 Obtain the MSM31X.NLM, ETHERTSM.NLM, and NBI31X.NLM files from Novell
and copy them to the directory on your hard disk where other NLM files are
located. This is typically in the sys:system directory. You need a NetWare client
system to copy the NLM files to the server.
2 Copy the LAN driver file (3C99x.LAN) to the same directory.
NetWare Server NLM Name
NetWare 3.12 ETHERTSM.NLM
NBI31X.NLM
MSM31X.NLM
NetWare 4.10, 4.11, and 5.0 ETHERTSM.NLM
NBI.NLM
MSM.NLM
NOTE: 3CR990 NICs do not support NetWare 3.11 and 4.0x servers.
NOTE: To upgrade the NetWare driver for a NetWare server, you must create
installation diskettes from the EtherCD that accompanied this product. Use these
diskettes to install the NetWare server driver.