Filter
Top Products
Removing DynamicAccess Technology 83
Windows NT 4.0 and
Windows NT 3.51
Follow this procedure to remove DynamicAccess technology from a PC running
Windows NT 4.0 or Windows NT 3.51:
1 Double-click the Network icon in the Control Panel.
2 Select the DAPassThru Driver Transport protocol.
■ Windows NT 4.0—this protocol is located on the Protocols tab.
■ Windows NT 3.51—this protocol is located in the list of installed network
software on the Network Settings screen.
3 Click Remove.
4 Close the Network screen, and then restart the PC when prompted.
DynamicAccess technology is removed from the PC.