Filter
Top Products
6-16
CHAPTER 6: COMMAND LINE INTERFACE
Default Setting
Outdoor 11a Building to Building
Command Mode
Global Configuration
Example
system name
This command specifies or modifies the system name for this device. Use the no
form to restore the default system name.
Syntax
system name <name>
no system name
name - The name of this host.
(Maximum length: 32 characters)
Default Setting
Outdoor 11a Building to Building
Command Mode
Global Configuration
Example
username
This command configures the user name for management access.
Syntax
username <name>
name - The name of the user.
(Length: 3-16 characters, case sensitive)
Outdoor 11a Building to Building (config)#prompt RD2
RD2(config)#
Outdoor 11a Building to Building (config)#system name AP
Outdoor 11a Building to Building (config)#