Filter
Top Products
6-24
CHAPTER 6: COMMAND LINE INTERFACE
Example
This example restricts management access to the indicated addresses.
APmgmtUI
This command enables and disables management access to the access point
through SNMP, Telnet and web interfaces.
Syntax
APmgmtUI <[SNMP | Teln et | Web] enable | disable>
• SNMP - Specifies SNMP management access.
• Telnet - Specifies Telnet management access.
• Web - Specifies web based management access.
- enable/disable - Enables or disables the selected management access
method.
Default Setting
All enabled
Command Mode
Global Configuration
Example
This example restricts management access to the indicated addresses.
Outdoor 11a Building to Building (config)#apmgmtip multiple 192.254.1.50
255.255.255.0
Outdoor 11a Building to Building (config)#
NOTE: Secure Web (HTTPS) connections are not affected by the UI Management
or IP Management settings.
Outdoor 11a Building to Building (config)#apmgmtui SNMP enable
Outdoor 11a Building to Building (config)#