Filter
Top Products
6-77
Using the Command Line Interface
Syntax
802.1x-supplicant user <username> <password>
no 802.1x-supplicant user
• username - The access point name used for authentication to the network.
(Range: 1-32 alphanumeric characters)
• password - The MD5 password used for access point authentication.
(Range: 1-32 alphanumeric characters)
Default
None
Command Mode
Global Configuration
Command Usage
The access point currently only supports EAP-MD5 CHAP for 802.1X
supplicant authentication.
Example
show authentication
This command shows all 802.1X authentication settings, as well as the address
filter table.
Outdoor 11a Building to Building(config)#802.1x-supplicant user AP8760
dot1xpass
Outdoor 11a Building to Building(config)#