Filter
Top Products
6-66
CHAPTER 6: COMMAND LINE INTERFACE
radius-server address
This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server [secondary] address <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
radius-server port
This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for authentication messages.
(Range: 1024-65535)
Default Setting
1812
Command Mode
Global Configuration
radius-server vlan-format Sets the format for specifying VLAN IDs on the
RADIUS server
GC 6-70
show radius Shows the current RADIUS settings Exec 6-70
Outdoor 11a Building to Building (config)#radius-server address
192.254.2.25
Outdoor 11a Building to Building (config)#
Command Function Mode Page