Filter
Top Products
6-83
Using the Command Line Interface
Table 21 Filtering Commands
filter local-bridge
This command disables communication between wireless clients. Use the no form
to disable this filtering.
Syntax
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless communications
with any other client, either those associated to the same VAP interface or
any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP interfaces.
Command Function Mode Page
filter local-bridge Disables communication between wireless clients GC 6-83
filter ap-manage Prevents wireless clients from accessing the
management interface
GC 6-85
filter uplink enable Ethernet port MAC address filtering GC 6-85
filter uplink Adds or deletes a MAC address from the filtering table GC 6-85
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Ethernet packets against the protocol filtering table
GC 6-86
filter ethernet-type
protocol
Sets a filter for a specific Ethernet type GC 6-87
show filters Shows the filter configuration Exec 6-87