Filter
Top Products
6-155
Using the Command Line Interface
The VLAN commands supported by the access point are listed below.
Table 29 VLAN Commands
NOTE: When VLANs are enabled, the access point’s Ethernet port drops all
received traffic that does not include a VLAN tag. To maintain network
connectivity to the access point and wireless clients, be sure that the access point
is connected to a device port on a wired network that supports IEEE 802.1Q VLAN
tags.
Command Function Mode Page
vlan Enables a single VLAN for all traffic GC 6-156
management-
vlanid
Configures the management VLAN for the access point GC 6-156
vlan-id Configures the default VLAN for the VAP interface IC-W-VAP 6-157