Filter
Top Products
6-79
Using the Command Line Interface
address filter default
This command sets filtering to allow or deny listed MAC addresses.
Syntax
address filter default <allowed | denied>
• allowed - Only MAC addresses entered as “denied” in the address
filtering table are denied.
• denied - Only MAC addresses entered as “allowed” in the address
filtering table are allowed.
Default
allowed
Command Mode
Global Configuration
Example
Related Commands
address filter entry (6-79)
802.1x-supplicant user (6-76)
address filter entry
This command enters a MAC address in the filter table.
Syntax
address filter entry <mac-address> <allowed | denied>
• mac-address - Physical address of client. (Enter six pairs of hexadecimal
digits separated by hyphens; e.g., 00-90-D1-12-AB-89.)
• allowed - Entry is allowed access.
• denied - Entry is denied access.
mac- authentication
session-timeout
Sets the interval at which associated clients will be
re-authenticated with the RADIUS server authentication
database
GC 6-82
show authentication Shows all 802.1X authentication settings, as well as the
address filter table
Exec 6-76
Outdoor 11a Building to Building (config)#address filter default denied
Outdoor 11a Building to Building (config)#
Command Function Mode Page