3Com DUA1860-0AAA01 Network Hardware User Manual


 
DUA1860-0AAA01
SNMP Configuration 2-49
Authentication Failure Trap:
Text Field (
e
/
d
). Enable or disable
the authentication failure trap for the SNMP agent. Enter
e
to
enable, or enter
d
to disable. The default is disable.
If the trap is enabled, the agent generates a trap message
whenever a client tries to access it using a community name you
have not defined. The message is sent to the trap destination of
each community for which traps are enabled. Use the SNMP
Community Trap Configuration screen to enable all traps, and
define the destinations that are to receive messages reporting
traps.
If the trap is disabled, no authentication failure trap messages are
generated, regardless of whether or not traps have been enabled
on the SNMP Community Trap Configuration Screen.
Changes to this field are only saved during a bridge reset, and
take effect from then on.
Community Name:
Text Field. A community name is a name by
which a client can access this agent. If the field is blank, you can
use it to add a community name. The name can contain from 1 to
32 characters.
Press [Space] to delete a community name. The default is blank.
Changes to this field are only saved during a bridge reset, and
take effect from then on.