Filter
Top Products
ADCP-96-015 • Issue 1 • July 2004
Page 19
© 2004, ADC Telecommunications, Inc.
Figure 10. Mounting the ACE-142S Cabinet on the Concrete Pad
7. Using appropriate lifting equipment, hold the cabinet in position for mounting over the
ground spacer or PMF.
8. Lower the cabinet onto the ground spacer or PMF and align the mounting holes in the
cabinet base with the threaded holes in the spacer or PMF.
9. If the installation includes a ground spacer, secure the cabinet to the spacer using the four
hex bolts, four flat washers and four nuts provided with the spacer. If the installation does
not include a ground spacer, secure the cabinet to the PMF using the four hex bolts, lock
flat washers, and four flat washers provided with the cabinet. Tighten all fasteners securely.
4.6.2 Mounting the ACE-142V Cabinet on a Concrete Pad
Use the following procedures to mount the ACE-142V cabinet on the concrete pad.
1. Remove the plastic plugs that are installed in the threaded corner holes of the PMF and
clean off any concrete that may have adhered to the top of the PMF.
ACE-142S
CABINET
(FRONT)
CABLE
CONDUIT
19617-B
CONCRETE
PAD
PAD MOUNTING
FRAME (PMF)
CAPSCREWS, LOCK
WASHERS, AND FLAT
WASHERS (4 PLACES)
GROUND
SPACER
(ACCESSORY)
HEX BOLTS, FLAT
WASHERS, AND
NUTS (4 PLACES)