ADC ACE-142S/142V Network Card User Manual


 
ADCP-96-015 Issue 1 July 2004 Preface
Page v
© 2004, ADC Telecommunications, Inc.
ABOUT THIS MANUAL
This publication provides a complete description of the Fiber Distribution Terminal (FDT)
ACE-142S/142V Cabinet. Also included are procedures for mounting the cabinet, installing and
splicing the feeder and distribution cables, installing additional connector panels and splitter
modules, connecting the splitter output fibers to the distribution fibers, and replacing damaged
components.
RELATED PUBLICATIONS
Listed below are related manuals and their publication numbers. Copies of these publications
can be ordered by contacting the ADC Technical Assistance Center at 1-800-366-389, extension
73475 (in U.S.A. or Canada) or 1-952-917-3475 (outside U.S.A. and Canada).
Round Splice Tray Cable Routing Instructions 90-321
Optical Fiber Systems Cleaning and Mating Instructions 90-159
ADMONISHMENTS
Important safety admonishments are used throughout this manual to warn of possible hazards to
persons or equipment. An admonishment identifies a possible hazard and then explains what
may happen if the hazard is not avoided. The admonishments — in the form of Dangers,
Warnings, and Cautions — must be followed at all times. These warnings are flagged by use of
the triangular alert icon (seen below) and are listed in descending order of severity of injury or
damage and likelihood of occurrence.
GENERAL SAFETY PRECAUTIONS
Title ADCP Number
Danger: Danger is used to indicate the presence of a hazard that will cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Warning: Warning is used to indicate the presence of a hazard that can cause severe personal
injury, death, or substantial property damage if the hazard is not avoided.
Caution: Caution is used to indicate the presence of a hazard that will or can cause minor
personal injury or property damage if the hazard is not avoided.
Warning: Wet conditions increase the potential for receiving an electrical shock when
installing or using electrically-powered equipment. To prevent electrical shock, never install or
use electrical equipment in a wet location or during a lightning storm.