Filter
Top Products
62 Agilent E6474A User’s Guide
3 Set Up Your System
E6473B option 023. The carry bag contains a bracket that
secures the Direct Connect Hub and the battery, and provides
the power connection between them.
Chassis and backpack assembly
Use the straps provided to secure all components within the
single receiver backpack.
1 Insert the battery into the chassis, and then push until it
locks in place, as shown in Figure 5 on page 30.
2 Align the tabs of the Direct Connect Hub with the slots in the
chassis, then attach it to the chassis by pushing it rearward
until it locks in place.
3 Secure the chassis assembly within the right side of the
backpack.
4 Secure the Agilent digital receiver within the left side of the
backpack.
NOTE
Refer to Appendix C, “System Information", for antenna and phone
interface cable part numbers.
NOTE
The battery is keyed, and can only be properly inserted into the chassis
when the connectors are aligned.