Alcatel-Lucent 6850 Switch User Manual


 
page -xii OmniSwitch 6800/6850/9000 Advanced Routing Configuration Guide December 2007
Who Should Read this Manual?
The audience for this user guide is network administrators and IT support personnel who need to config-
ure, maintain, and monitor switches and routers in a live network. However, anyone wishing to gain
knowledge on how advanced routing software features are implemented in the OmniSwitch 6800 Series,
OmniSwitch 6850 Series, and OmniSwitch 9000 Series switches will benefit from the material in this
configuration guide.
When Should I Read this Manual?
Read this guide as soon as you are ready to integrate your OmniSwitch into your network and you are
ready to set up advanced routing protocols. You should already be familiar with the basics of managing a
single OmniSwitch as described in the OmniSwitch 6800/6850/9000 Switch Management Guide.
The topics and procedures in this manual assume an understanding of the OmniSwitch directory structure
and basic switch administration commands and procedures. This manual will help you set up your
switches to route on the network using routing protocols, such as OSPF.
What is in this Manual?
This configuration guide includes information about configuring the following features:
Open Shortest Path First (OSPF) protocol
Border Gateway Protocol (BGP)
Multicast routing boundaries
Distance Vector Multicast Routing Protocol (DVMRP)
Protocol-Independent Multicast, Sparse Mode (PIM-SM) protocol
What is Not in this Manual?
The configuration procedures in this manual use Command Line Interface (CLI) commands in all exam-
ples. CLI commands are text-based commands used to manage the switch through serial (console port)
connections or via Telnet sessions. Procedures for other switch management methods, such as web-based
(WebView or OmniVista) or SNMP, are outside the scope of this guide.
For information on WebView and SNMP switch management methods consult the OmniSwitch 6800/
6850/9000 Switch Management Guide. Information on using WebView and OmniVista can be found in the
context-sensitive on-line help available with those network management applications.
This guide provides overview material on software features, how-to procedures, and application examples
that will enable you to begin configuring your OmniSwitch. It is not intended as a comprehensive refer-
ence to all CLI commands available in the OmniSwitch. For such a reference to all OmniSwitch CLI
commands, consult the OmniSwitch CLI Reference Guide.