Filter
Top Products
Maintenance page
www.3ware.com 99
Check SMART Thresholds. This test checks to see whether SMART
thresholds have been exceeded.
The SMART thresholds indicate when a drive is likely to fail, based on the
number of errors that have been recorded through SMART (Self-Monitoring,
Analysis and Reporting Technology).
If any of the disk drives have detected a “threshold exceeded” condition, then
an AEN is logged to the 3DM Alarms page. Moreover, if anything unusual is
found during any self-test, it will be logged as an Alarm.
Maintenance page
Figure 39. Maintenance Page
The Maintenance page appears when you choose Management >
Maintenance
from the menu bar.
The Maintenance page lets you perform maintenance tasks on existing units
on the current controller and lets you create new units by configuring
available drives.
Information about the Maintenance page is organized under these headings:
• Rescan Controller
• Unit Maintenance
• Maintenance Task Buttons
• Available Drives (to Create Units)