Filter
Top Products
Chapter 8. 3DM 2 Reference
88 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
# of Drives. The number of drives connected to the controller.
Download Error Log: Click on this link to download the firmware error log
to your computer. This feature is important when contacting AMCC for
support with your controller. It will help AMCC identify the problem you
encountered.
Unit Information page
Figure 33. Unit Information Page
The Unit Information page appears when you choose Information > Unit
Information
from the menu bar, or when you click an ID number on the
Controller Summary page.
This page shows a list of the units on the current controller and provides
summary information about each unit.
To see details about a particular unit, click the link in the Unit # column.
Unit #. The unit number assigned to the unit by the firmware.
Name. If a name has been given to this unit, it shows here. If it is empty, no
name has been assigned. You can name your unit in the
Unit Names section
of the
Management > Controller Settings page.
Type. The type of unit, specified during configuration: RAID 0, RAID 1,
RAID 5, RAID 10, Single Disk, or Spare. For details about each of the RAID
levels, see “Available RAID Configurations” on page 7.
Capacity. The logical capacity (size) of the unit. 1KB = 1024 bytes.
Status. The operational status of the unit: OK, Rebuilding, Initializing,
Migrating, Verifying, Degraded, or Inoperable (missing drives). When a unit
is Rebuilding, Initializing, Migrating, or Verifying, the percentage (%)
complete is also shown. For an explanation of the statuses, see “Unit Statuses”
on page 63.