Filter
Top Products
Chapter 8. 3DM 2 Reference
106 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
Alarms page
Figure 41. Alarms Page
The Alarms page appears when you click Monitor > Alarms on the menu bar.
This page displays a list of AENs (asynchronous event notifications) received
from the controller displayed in the drop-down list in the menu bar.
Up to 1000 events can be listed. After the 1000-limit is reached, the oldest
events are deleted, as new ones occur.
You can sort the events by severity or time. To do so, just click the column
header.
For information about a particular event, click it on the Alarms page; the 3DM
Help will open with information about the event. For a complete listing of the
alarms that appear on the Alarms page, see “Error and Notification Messages”
on page 113.
Clear Alarms. The Clear Alarms button removes all alarms shown in the list.
Sev. Shows the severity of the event. Three levels are provided:
• Errors are shown next to a red box
• Warnings are shown next to a yellow box
• Information is shown next to a blue box
Time. The time shown for alarms generated by 7000- and 8000- series
controllers is the time retrieved from the driver by 3DM. The time shown for
alarms generated by 9000-series controllers is the time received by the driver
from firmware.
Message. The specific text relating to the alarm condition.