Filter
Top Products
Chapter 3. 3DM 2 (3ware Disk Manager) Introduction
18 3ware Serial ATA RAID Controller User Guide for the Power Mac G5
(You can also click Continue, in which case you will see this message the
next time you start 3DM.)
3 When the 3DM logon screen appears, select whether you are a
User or
Administrator.
4 Enter your password and click
Login.
If you are logging in for the first time after installing 3DM, the default
password for both User and Administrator is
3ware.
Starting and Stopping the 3DM Process Manually
on the Macintosh
The 3DM process should start automatically after it has been installed. If it
does not, you can start it manually.
To see if the 3DM process is already running
• Open a Terminal window and type:
ps -ax | grep 3dm2 | grep -v grep
If 3DM is running, you will see it included on the output line that
displays.
To stop the 3DM process so you can restart it
1 In a Terminal window, type:
sudo killall 3dm2
2 When prompted for it, enter your administrator password.
3 Wait for a minute or so before verifying that the process has been
terminated. (It can take a couple of minutes for the process to be stopped.)
4 Verify that the process has been terminated by typing
ps -ax | grep 3dm2 | grep -v grep
The output line should not include 3DM.
Note: If you forget the passwords, uninstalling and reinstalling 3DM
resets the passwords to 3ware
.
Warning: Before you start this process manually, make sure that the 3DM process
is not already running. Starting multiple instances of 3DM can cause errors during
use of 3DM.