Filter
Top Products
CM1164 User Manual
26
Powering Off and Restarting
If it becomes necessary to power off the unit, before starting it back up you
must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch’s power adapter cable.
3. Wait 10 seconds, then plug the switch’s power adapter cable back in.
4. After the switch is up, Power On the computers.
KVM Reset
To reset your complete KVM installation to the factory default settings, use the
OSD menu. See Restore Default Values, page 48.
cm1164.book Page 26 Thursday, August 16, 2012 4:50 PM