Filter
Top Products
49
Chapter 6
Firmware Upgrade
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth, automated process for upgrading the CM1164’s firmware. New
firmware upgrade packages are posted on our Website as new firmware
revisions become available. Check the web site regularly to find the latest
packages and information relating to them:
http://www.aten.com
Before you Begin
To prepare for the Firmware Upgrade, do the following:
1. Using a computer connected to the CM1164 unit (via the DVI KVM Port
Section, see Rear View, page 7), go to our Internet support site and choose
the model name of your device (CM1164) to get a list of available
Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
3. Enable Firmware Upgrade through the OSD (see Firmware Upgrade,
page 48). All the LEDs flash orange to indicate that Firmware Upgrade
Mode is in effect.
cm1164.book Page 49 Thursday, August 16, 2012 4:50 PM