Filter
Top Products
CM1164 User Manual
52
Upgrade Succeeded
After the upgrade has completed, a screen appears to inform you that the
procedure was successful:
Click Finish to close the Firmware Upgrade Utility.
After a successful completion, the CM1164 exits Firmware Upgrade Mode,
and resets itself.
Upgrade Failed
If the Upgrade Succeeded screen does not appear, it means that the upgrade
failed to complete successfully, in which case you should do the following:
1. Power off the CM1164 by removing the power cord.
2. Invoke Firmware Upgrade Mode by holding down the front panel Mode
Selection pushbutton (see Components, page 6) and power on the
CM1164. The KVM LEDs flash orange together.
3. Do the firmware upgrade procedure again.
cm1164.book Page 52 Thursday, August 16, 2012 4:50 PM