Filter
Top Products
7
Chapter 2
Hardware Setup
Before You Begin
Stacking and Rack Mounting
Stacking
The PN9108 can be placed on any appropriate level surface that can safely
support its weight plus the weight of its attached cables. To place or stack the
PN9108, remove the backing material from the bottom of the rubber feet that
came with this package, and stick them onto the switch's bottom panel at the
corners, as shown in the diagram, below
:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7cm at the back for power cord and cable clearance.
1. Important safety information regarding the placement of this
device is provided on page 69. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.