Filter
Top Products
PN9108 User Manual
30
The top Configuration panel allows you to set up a power management
configuration for each port. These settings determine what takes place when
you click the Power Button On or Off. The meanings of the field headings are
given in the following table:
Heading Meaning
Station Name To make things more convenient on a multi-station
installation, each station can be given a distinctive name.
To name a station key in the name of your choice - up to
15 letters and numbers.
Outlet Name Each outlet can be given a distinctive name. The
maximum number of characters is 15.
Modem Ring Resume* This is a Safe Shutdown and Reboot option (see
Chapter 5). If this option is selected, when the Outlet's
Power Button is clicked OFF, the PN9108 waits for the
amount time set in the Power Off Delay dialog box (see
below), and then performs a Safe Shutdown on the
computer attached to its Outlet. When the Power Button
is clicked ON, the PN9108 waits for the amount time set
in the Power On Delay field (see below), and then
restarts the computer. The front panel LEDs flash while
the action is pending.
Note: 1. With this option, although the computer has
been turned off, it is still receiving power
through the outlet. Therefore, the computer can
be locally (physically) turned on or off - in which
case the computer's status may not correspond
with the Outlet Status display. The gray “socket”
icon flashes (instead of remains steady) to
remind you of this. To make sure that the
computer is in sync with the display, click the
power On/Off/On (or Off/On/Off) when making a
power status change.
2. If you experience restarting problems even
though you have enabled this feature, see
Problem 6:, page 86, in the Troubleshooting
section.
System after AC Back* This is a Safe Shutdown option (see Chapter 5). If this
option is selected, when the Outlet's Power Button is
clicked OFF, the PN9108 waits for the amount time set in
the Power Off Delay dialog box (see below), and then
performs a Safe Shutdown on the computer attached to
its Outlet.
When the Power Button is clicked ON the PN9108 waits
for the amount time set in the Power On Delay field (see
below), and then restarts the computer.
Note: With this option power through the Outlet is cut off.
Although it was safely shutdown, the computer does not
receive any power through the outlet.