Filter
Top Products
Chapter 6. Out of Band Operation
63
Finishing Up
This step is the same as for a direct dial in connection. See page 60 for details.
Logging In
1. In the Out of Band Configuration dialog box (see page 47), make sure that
the Enable dial-out function setting is disabled (the box is unchecked), and
that the PN9108's baud rate is set to 115200.
2. Double click the icon you created in the Dial-up Network folder.
3. Key in your Username and Password; click Connect and wait for the
Authentication procedure to complete (be patient, it may take a few
moments).
4. Use your browser or Telnet to access the PN9108 the same way as if you
were accessing it over the net.