Filter
Top Products
Appendix
87
3. Modem Ring Resume supports restarting after a normal power down. If the
computer shut down due to a crash or a power failure, you must restart the
computer in order for Modem Ring Resume to function again.
A workaround for this is to enable System after AC Back (see System after
AC Back*, page 30).
We recommend enabling both Modem Ring Resume and System after AC
Back – assuming your computer’s BIOS supports it.
Problem 7:
System after AC Back doesn’t work.
Solution:
Make sure System after AC Back is set to On (not Last State) in your
computer’s BIOS.
Problem 8:
After I rack mount my PN9108, the cables often come unplugged from the back
of the unit.
Solution:
The connectors used on this device all conform to industry standard
specifications. Nevertheless, if this problem occurs, we recommend using
cable ties and cable bars to safely and securely route the cables. Contact your
rack dealer for the cable routing hardware appropriate for your rack.