Filter
Top Products
PN9108 User Manual
54
Indirect Terminal Connection (HyperTerminal)
Connection Setup
1. Set up your hardware configuration to match the diagram, below:
Note: 1. Use standard 9 pin serial modem cables to connect to the
modems.
2. Connect the serial port of the modem that the PN9108 uses to its
RS-232 port.
2. Create a HyperTerminal connection.
a) Start with Step 2 of the HyperTerminal Setup section (page 50).
b) For Connect Using: in Step 3, either key in the full path to your modem
driver, or select Standard 28800bps Modem from the list.
c) Follow Steps 4-8 to complete the setup and create the connection icon.
This completes the HyperTerminal setup. For Windows NT, 2000, XP and
Windows Server 2003 systems, a HyperTerminal icon that connects you to
the PN9108 is created on the desktop. For Windows 98 and ME, you must
access HyperTerminal from the Windows Start Menu.
Remote
Operator
Modem Modem
Phone Line
PN9108
Serial Cable
Serial Cable