Filter
Top Products
PN9108 User Manual
50
Direct Terminal Connection (HyperTerminal)
HyperTerminal Setup
1. Use a 9 pin null modem cable (pin 2 to pin3; pin 3 to pin2) to connect a
COM port on a PC to the PN9108's RS-232 port.
Note: The null modem cable must be wired for either full or loop back
handshaking. See the diagrams on page 90for details.
2. On your PC, run the HyperTerminal program:
Start → Programs → Accessories → Communications →
Hyper Terminal → Hypertrm.exe
The following dialog box appears:
Key a name to describe the connection in the Name field (we used
Com1Test); select an icon to represent the connection; then click OK.
Note: In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.