Filter
Top Products
PN9108 User Manual
56
Logging In
1. In the Out of Band Configuration dialog box (see page 47), make sure that
the Enable dial-out function setting is disabled (the box is unchecked), and
that the PN9108's baud rate is set to 115200.
2. Double click the HyperTerminal icon on your desktop.
3. In the VT100 terminal window, key in:
atdt [telephone number of the modem connected to the
PN9108] [Enter]
The terminal responds with:
CONNECT115200
4. Wait at least 60 seconds, then key in:
???
5. Key in your Username and Password to bring up the PN9108's main menu.