Filter
Top Products
Chapter 6. Out of Band Operation
47
Modem Connection
The modem connection function makes it possible to access the PN9108 from
a remote location with a dial in terminal connection; a dial in PPP connection;
or a dial out connection.
For the dial out function, you must establish an account with an ISP (Internet
Service Provider), and then use a modem to dial up to your ISP account. To
configure the PN9108 for a dial up connection, do the following:
1. Select Modem in the OOBC dialog box.
A new dialog box appears:
2. Make sure that the OOB function is enabled (there is a checkmark in the
Out Of Band Enable checkbox).
3. Under COM Port Settings, specify the baud rate that your modem uses to
connect to your ISP.