Filter
Top Products
PN9108 User Manual
16
The Power Status Screen
The Top Panel
Power Buttons:
The top panel of the Power Status screen is divided into eight subareas which
correspond to the A- H outlets on the PN9108's rear panel.
Each subarea is composed of a socket icon that functions as the Power Button
for its corresponding outlet, and an information panel to its right. Clicking the
socket icon turns the power status of the computer attached to its outlet On or
Off. The icon and the label under it inform you of the power status as shown in
the following table:
Indication Status
Steady Gray Power to the outlet is OFF.
Flashing Gray Power to the outlet is OFF but Modem Ring Resume has been
specified as the remote power option (see Modem Ring
Resume*, page 30, for details).
Flashing Yellow A change in the outlet's power status is pending. See Modem
Ring Resume*and System after AC Back*, page 30, for details.
Steady Amber Power to the outlet is ON.
Flashing Lightbulb Indicates that the outlet is either experiencing an overcurrent
situation, or the relay has failed. Click the icon to recover. If the
port recovers successfully, it returns to the status it was at before
it failed, and the icon changes to reflect the recovered status. If
the port cannot recover, contact Altusen technical support.