Filter
Top Products
Chapter 6. Out of Band Operation
57
Direct Dial In Connection (PPP)
This type of connection works directly through the COM port.
Connection Setup
1. Use a 9 pin null modem cable to connect a COM port on a PC to the
PN9108's RS-232 port.
Note: The null modem cable must be wired for either full or loop back
handshaking. See the diagrams on page 90 for details.
2. On your PC, run the Make New Connection setup program:
Start → Programs → Accessories → Communications →
Make New Connection
The following dialog box appears:
Note: In the examples that follow we use COM1. If you use a different
COM port, change the settings accordingly.