Filter
Top Products
PN9108 User Manual
46
Enable OOB operation by clicking to put a checkmark in the Out Of Band
Enable checkbox.
Note: Since OOB operation and UPS operation both require the use of the
RS-232 port, enabling OOB automatically disables the PN9108's UPS
feature.
The dialog box offers two COM Port Connection types: Computer and
Modem.
Computer Connection
This selection is for a direct connection between a local computer's COM port
and the PN9108's RS-232 port.
1. For the COM Port Settings, select the baud rate that the two COM ports
will use (usually 115200).
2. Click Save to set the baudrate selection that you made.
Note: Clicking Restore returns the baud rate entry to its previous setting.
3. Use a null modem cable to connect the local computer's serial port to the
PN9108's RS-232 port.
Note: The null modem cable must be wired for either full or loop back
handshaking. See the diagrams on page 90 for details.
You can now make a direct terminal or PPP connection to the PN9108. The
procedure for making a direct terminal connection is discussed on page 50; the
procedure for making a direct PPP connection is discussed on page 57.