Filter
Top Products
Chapter 6. Out of Band Operation
61
3. Change the dialog box settings to match the ones in the diagram.
Note: The IP address can be any address in the same network segment as
the PN9108 (but not the same IP address as the PN9108).
4. Click OK to leave the dialog box, then click OK again.
5. In the Out of Band Configuration dialog box (see page 47), uncheck
Enable dial out.
This completes the Direct Dial In setup.
Logging In
1. Double click the icon you created in the Dial-up Network folder.
2. Key in your Username and Password, then click Connect.
3. Use your browser or Telnet to access the PN9108 the same way as if you
were accessing it over the net.