Barco H600 Projector User Manual


 
8. Advanced
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp 1 is switched out.
When switching to single mode, returning to the dual mode will not be possible in the first 60 seconds, Dual in
the menu is greyed out and the LED is flickering, showing that hot restrike (restart) of the lamp is impossible
during that time laps (60 sec).
8.5.3 History
How to view the history ?
1. Press MENU to activate the Tool bar
2. Press to select the Lamp item
3. Press to Pull down the Lamp menu
4. Use or to select History
Image 8-48
5. Press ENTER
A textbox is displayed
Image 8-49
8.5.4 Reset lamp Runtime
When to reset the lamp runtime ?
Reset the lamp runtime whenever you replace a lamp
WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
100 R5976821 BARCO ICON 15/03/2007