Filter
Top Products
A. Troubleshoot
A. TROUBLESHOOT
A.1 Using the OSD
What can be done ?
The projector bus allows the diagnostic of different hardware components divided in two main groups.
•I
2
C diagnostics : a number of internal electronic boards can be diagnosed and a graphical interface shows whether an error is
• Lamps and power supply : lamp temperature and power related failures are logged and can be checked at any time.
How to display the I
2
C diagnostics menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select I
2
C
Image A-1
A textbox is displayed
How to display the Lamps and power supply diagnostic menu ?
1. Press MENU to activate the Tool bar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to pull down the menu
6. Press ENTER to select Lamps and power supply
Image A-2
A textbox is displayed
Image A-3
R5976821 BARCO ICON 15/03/2007 139